header
> Home >News
News
News Links
Models SDB, SDBD, STXD & STXB
Model eSQD
Model CTBRHUL
Model CTB
Model PC
 
 
 
 
New Spun Aluminum Centrifugal Power Roof Ventilators

When we started the project to improve our upblast and downblast spun aluminum power roof ventilators we set fan efficiency as our number one goal. We knew the wheel, the heart of the unit, was the place to start so we took meticulous steps to design and engineer the most efficient and cost effective wheel we could. Our new wheel features curved blades, solid rivets and improved cooling vanes which together ensure the best fan performances possible. Additionally, through improvements to important structural components of the fans we increased the overall strength of our centrifugal fans compared to our older models. We are proud to say we have created a product line that you can be sure is one of the most efficient and robust available on the market today.

We designed these fans so you can use smaller models and motors to meet the performance needed. With our new centrifugal spun aluminum line we are able to deliver wider performance ranges and unit sizes. This means you can:

  • Save $ by using less energy to meet the same performance as the competitor.
  • Save $ by choosing the smallest motor to get the job done.

Our new series S spun aluminum centrifugal power roof ventilators consists of belt and direct drive models for both upblast and downblast applications.

Model SDB - Downblast Belt Drive Roof Exhauster:

  • Sizes: 6, 7, 8, 10, 12, 14, 15 & 16
  • CFM Range: 40 to 4135
  • Static Pressure: up to 1-1/2" w.g.
  • Warranty: 5-years
  • Certifications: cULus 705 and AMCA Air and Sound

Model SDBD - Downblast Direct Drive Roof Exhauster:

  • Sizes: 6, 7, 8, 10, 12, 14, 15 & 16 
  • CFM Range: 40 to 4980
  • Static Pressure: up to 1-3/4" w.g.
  • Warranty: 5-years
  • Certifications: cULus 705 and AMCA Air and Sound

Model STXB - Upblast Belt Drive Roof Exhauster:

  • Sizes: 8, 10, 12, 14, 15 & 16
  • CFM Range: 200 to 3975
  • Static Pressure: up to 1-1/2" w.g.
  • Warranty: 5-years for UL 705 models / 2-years for UL 762 models
  • Certifications: cULus 705, cULus 762 and AMCA Air and Sound
  • Roof or wall mounting

Model STXD - Upblast Direct Drive Roof Exhauster:

  • Sizes: 6, 7, 8, 10, 12, 14, 15 & 16
  • CFM Range: 55 to 4780
  • Static Pressure: up to 1-1/2" w.g.
  • Warranty: 5-years for UL 705 models / 2-years for UL 762 models
  • Certifications: cULus 705, cULus 762 and AMCA Air and Sound
  • Roof or wall mounting
Go to the SDB, SDBD, STXD & STXB Product page go

New Product: Model eSQD - Square Inline Centrifugal Fans with EC Motor

We our pleased to introduce our new Model eSQD. This model features Electronically Commutated Motors (EC Motor) which offer the energy efficiency of a DC motor with the ease of maintenance of Direct Drive motors. S&P's EC Motor,eMotor, provides the benefit of a fully speed controllable motor with a motor mounted potentiometer for easy speed adjustment.

Model eSQD is available in sizes 8, 10 and 12 and is designed to exhaust air up to 2,300 CFM at static pressures up to 1" W.G. These units are the perfect selection for clean air applications where space is a leading consideration. The compact housing with removable access doors can be mounted in any orientation.

The eSQD is AMCA Licensed for Air and Sound and cULus 705 Listed and has the added benefit of a 2-year fan and 1-year motor warranty.  

This new model is now available for selection in Optisizer2.

Go to the eSQD Product page go

NEW Model CTBRHUL: Belt Driven Inline Tubular Centrifugal Fans for Restaurant Exhaust
CTBRHUL

August 9, 2013 - JencoFan is pleased to introduce the RHUL addition to our Model CTB Inline Tubular Centrifugal Duct Fans. The tubular centrifugal line offers some of the widest range of sizes, horsepower and performance in the industry. Models CTB & CTBRHUL are high capacity belt driven centrifugal fans rated from 300 to 20,000 CFM, with static pressure capability up to 2-1/2". 

The CTBRHUL has the same standard features of the CTB fans with the addition of:

  • Two threaded drain connections aid maintenance and serviceability operations
  • Integral duct flanges with bolt locations per NFPA96.
  • Bearing cover gasket and shaft seal come standard to protect bearings and belts from steam, grease, and moisture
  • Optional inspection door with gasket located at either 8 or 4 o'clock position 

The CTBRHUL is specifically suited for restaurant exhaust where roof space is limited, sidewall mounted fans are prohibited or duct lengths are restricted. The CTBRHUL is also perfect in areas where extreme weather and outside air temperature is a concern when maintenance on the fan is needed.
  
The Model CTB-RHUL is AMCA Air and Sound Certified and cULus 762 Listed for grease removal, and have the added benefit of a 2-year fan and 1-year motor warranty.  

 
Go to the CTB Product page go  

 
NEW Model CTB: Belt Driven Inline Tubular Centrifugal Fans  
CTB June 10, 2013-We are is pleased to introduce our new Model CTB Inline Tubular Centrifugal Duct Fans. The tubular centrifugal line offers some of the widest range of sizes, horsepower and performance in the industry. Models CTB are high capacity belt driven centrifugal fans rated from 300 to 20,000 CFM, with static pressure capability up to 2-1/2". 

Designed for commercial and industrial in-line applications that demand quiet, efficient and reliable air movement, they are used to exhaust air from or supply air to such typical commercial and industrial applications as general building ventilation, enclosed garages, paint spray booths, heat and smoke ventilation systems and other applications where air is moved through a duct system against moderate static pressure. Sizes 13-42 may be suitable for outdoor use with addition of the optional motor cover, please contact factory for confirmation.  

The centrifugal wheel is designed to provide higher efficiencies and lower sound levels than propeller type fans when used in medium pressure ducted systems. Tubular centrifugal fans can be mounted in any position from horizontal to vertical providing for installations in the smallest possible space.  

The Model CTB is AMCA Air and Sound Certified and cULus 705 Listed, and have the added benefit of a 2-year fan and 1-year motor warranty
 
Go to the CTB Product page go  

 
NEW Bath Fans: Premium CHOICE (PC) Series  
PC50
PC50
PC110
PC80, 110, & 150
PCLK
PC with Lighted Grille (PCLK)
March 14, 2013- We are excited to announce our new Premium CHOICE (PC) Series ventilation fans. Available in 4 sizes (PC50, PC80, PC110 and PC150) the PC fans are part of our Residential/Light Commercial line of fans. The PC fans improve indoor air quality and increase your homes durability by quickly exhausting contaminants and excess moisture that can cause health issues, mold growth and structural damage.

The Premium CHOICE Series, as the name suggests, is all about the CHOICE! The fans come standard with aesthetically pleasing plastic grilles but you have the CHOICE of a Light Kit (PCLK) to turn the PC80, PC110 and PC150 into a lighted fan. If you need a humidity sensing fan, or if you need to control the speed just choose the Humidity Sensor (PCHS) or Speed Control (PCSC) respectively for all sizes. The controls and lighted grille are all "Plug-and-Play" options meaning one fan can be modified to be the exact fan needed. You even have the CHOICE to add a control or change the grille after the initial installation.   

These ENERGY STAR qualified fans are one of the most energy efficient lines and flexible line of ventilation fans available in North America.

All PC fans and accessories are in-stock at our distribution warehouse and are available for shipping as early as next day! 

 
Go to the PC Product page go  
     
     
© Copyright 2014 JencoFan
Home SPVG